Many manufacturers do not fit neatly into a single industry. A machine shop might produce parts for an aerospace prime one week and a medical device OEM the next. A contract manufacturer might hold certifications across several sectors simply because its customer base spans them. In these situations, a company often finds itself needing to conform to more than one quality management system (QMS) standard at the same time, most commonly ISO 9001 Consulting, AS9100 Consulting, and ISO 13485 Consulting.
The instinct is often to treat each standard as its own separate system, with its own manual, its own procedures, and its own audit schedule. That approach works, but it is rarely the most efficient one. Because these standards share a common structural foundation, most manufacturers are better served by building a single, integrated QMS that satisfies all three at once.
Why These Three Standards Overlap
ISO 9001 is the foundational quality management standard, and both AS9100 and ISO 13485 were built with it in mind. AS9100 incorporates the full text of ISO 9001 and adds requirements specific to the aerospace, space, and defense industry, such as configuration management, first article inspection, and counterfeit parts prevention. ISO 13485 follows a similar structure, layering medical device-specific requirements such as risk management, sterile product controls, and regulatory traceability on top of a quality management framework.
Because of this shared foundation, a large percentage of the clauses in AS9100 and ISO 13485 map directly back to ISO 9001 requirements. Document control, management review, internal audit, corrective action, and supplier management all function in fundamentally similar ways across the three standards. The differences tend to be concentrated in a smaller set of industry-specific clauses rather than spread evenly throughout the entire system.
The Problem With Running Separate Systems
When a company maintains entirely separate quality systems for each standard it holds, redundancy creeps in quickly. The same nonconformance might get logged in three different formats. Internal auditors might review the same process three times in three different audit cycles, asking nearly identical questions each time. Document control becomes a burden, since procedures that are functionally identical across standards get duplicated and then drift out of sync with one another over time.
This redundancy does not just cost time. It creates risk. When multiple versions of a similar procedure exist, it becomes easier for one to fall out of conformance while the others stay current, and auditors are quick to notice when a company’s own documentation does not agree with itself.
What an Integrated QMS Looks Like in Practice
An integrated management system does not mean treating AS9100 and ISO 13485 as afterthoughts bolted onto an ISO 9001 core. It means designing the QMS from the start so that the shared requirements live in one set of procedures, while the standard-specific requirements are addressed as clearly identified additions.
In practice, this typically involves:
A Single Set of Core Procedures
Processes like document control, management review, internal audit, corrective and preventive action, and supplier evaluation are written once and applied across the entire scope of the business, regardless of which product line or customer a given job supports.
Clearly Segregated Industry-Specific Requirements
Where a standard introduces a requirement the others do not share, such as ISO 13485’s requirements for sterile barrier systems or AS9100’s requirements for special processes and first article inspection, that requirement is documented as an addition to the core system rather than duplicated into a separate manual.
One Internal Audit Program
Rather than running three separate audit calendars, an integrated system builds a single internal audit schedule that covers every applicable clause across all three standards. Auditors are trained to evaluate against whichever combination of standards applies to the process or product line being reviewed.
One Management Review
Leadership reviews performance across the entire QMS in a single meeting cycle, rather than holding separate reviews for each certification. This gives leadership a more complete and accurate picture of how the business is actually performing, since issues in one part of the system are rarely isolated from the rest.
Where Integration Gets Complicated
Integration is not always straightforward, and a few areas require deliberate planning rather than a simple merge of existing documents.
Risk management is one example. ISO 13485 requires a defined risk management process tied to product safety and regulatory compliance, often referencing ISO 14971 for medical devices. AS9100 and ISO 9001 also require risk-based thinking, but in a less prescriptive form. An integrated system needs to apply the more rigorous medical device risk process where medical device work is involved, without over-engineering risk activities for product lines that do not carry the same regulatory exposure.
Traceability requirements can create similar complexity. Aerospace customers often require traceability tied to specific contractual and configuration management requirements, while medical device traceability is tied to regulatory recordkeeping obligations. A well-designed integrated system accounts for both without forcing one industry’s traceability method onto a product line that does not need it.
Scope definition also matters more in an integrated system than in a single-standard system. The QMS needs to clearly define which parts of the business fall under which certification, so that audits, management review, and internal communication all reflect an accurate picture of where each standard actually applies.
Auditing an Integrated System
Once a company moves to an integrated QMS, its internal and external audit approach usually needs to evolve as well. Internal auditors benefit from training that covers ISO 9001 Auditing fundamentals alongside the aerospace-specific elements found in AS9100 auditing and the medical device-specific elements found in ISO 13485 Auditing. This allows a single auditor to evaluate a process against every applicable standard in one pass, rather than requiring separate specialists to review the same area multiple times.
External certification audits typically remain separate events tied to each certification body and each standard, but a well-integrated internal system makes those external audits considerably smoother, since the underlying documentation and records already reflect a consistent, unified approach.
Working With a Consultant on Integration
Building or restructuring a QMS to serve multiple standards is a significant undertaking, particularly for a company that has been operating separate systems for years. An experienced consultant can map existing procedures against all applicable standards, identify where true overlap exists versus where a standard genuinely requires something distinct, and help restructure the system in a way that reduces administrative burden without weakening conformance to any individual standard.
Cavendish Scott has more than 40 years of experience helping manufacturers across the U.S., Canada, and beyond build quality systems that hold up to scrutiny, including companies that operate across aerospace, medical device, and general manufacturing simultaneously. Whether a company is starting from scratch or looking to consolidate existing certifications into a single, more efficient system, working with a consultant who understands all three standards can significantly shorten the path to a system that works as one, rather than three.
